Get in touch:

VAT Display

Sheet Piles - FKD 400/6 - KD4

FKD 400/6 overlapping sheet piles have an effective width of 408mm and are 6mm thick. This makes them a heavy duty option when compared with our 3.5mm thick standard lap trench sheets. 
As low as €199.00 €244.77
In stock

Quickest Available Delivery: Configure the product to view quickest available delivery time. Up To 14 Working Days - Ireland Final shipping costs and times are calculated at checkout. Shipping address may affect available delivery methods & times.


Sheet piling retains soil, using steel sheets with interlocking edges. Our standard trench sheets & sheet piles are supplied in 2.4m to 6.0m lengths, although other lengths are available upon request. Sheet piles are installed in sequence to design depth along the planned excavation perimeter or seawall alignment. The interlocked sheet piles form a wall for permanent or temporary lateral earth support with reduced groundwater inflow.

Vibratory hammers are typically used to install sheet piles. If soils are too hard or dense, an impact hammer can be used to complete the installation. At certain sites where vibrations are a concern, the sheets can be hydraulically pushed into the ground.


Effective Width408mm
Cross sectional area per sheet19.8cm2
Steel gradeS275JR

Hermeq stock a wide-range of Trench Sheets, Groundworks, Trench Covers & Road Plates conforming to all required safety specifications and regulations.

Need any help? Contact Hermeq Today.

Contact our team via phone (01) 903 9998, email or use our live chat feature between 8:00am & 17:00pm for help discovering our range.