Sheet Piles - FKD 400/6 - KD4
SKU TR1508
Quickest Available Delivery: 14 Days
HERMEQ FKD 400/6 overlapping sheet piles have an effective width of 408mm and are 6mm thick. A heavier Version of a HERMEQ Standard LAP designed for construction work.
Details
Sheet piling retains soil, using steel sheets with interlocking edges. Our standard trench sheets & sheet piles are supplied in 2.4m to 6.0m lengths, although other lengths are available upon request. Sheet piles are installed in sequence to design depth along the planned excavation perimeter or seawall alignment. The interlocked sheet piles form a wall for permanent or temporary lateral earth support with reduced groundwater inflow.
Vibratory hammers are typically used to install sheet piles. If soils are too hard or dense, an impact hammer can be used to complete the installation. At certain sites where vibrations are a concern, the sheets can be hydraulically pushed into the ground.
Properties
| Effective Width | 408mm |
| Depth | 50mm |
| Thickness | 6mm |
| Cross sectional area per sheet | 19.8cm2 |
| Steel grade | S275JR |
HERMEQ stock a wide-range of Trench Sheets, Groundworks, Trench Covers & Road Plates conforming to all required safety specifications and regulations.
Spec Sheets
Need help? Contact HERMEQ today.
Contact our team by email at sales@hermeq.ie by phone on 01-8063798 or use our contact form. We would be delighted to help you.
