Telehandler Tipping Skip On Castors
Frequently Bought Together
These telehandlers tipping skips are the most innovative on the market. They go one step further than any other telehandler skip on the market by incorporating castors (wheels) onto their base. These castors, which are fitted with brakes, allow the telehandler skip to be moved around on the floor when the skip is not connected to the forks of the telehandler.
The Auto Telehandler Tipping Skip aims to keep the driver of the Telehandler in the safety of his cab at ALL times. The Auto Telehandler Tipping Skip automatically locks and unlocks behind the fork heels using a gas strut, rather than using the traditional safety chain that forklift tipping skips have. Once loaded with waste material the Telehandler tipping skips are raised and tipped using the Telehandler arm itself. There is no pivot or self-tipping mechanism required on a Telehandler tipping skip.
Telehandler tipping skips are slowly taking over from the traditional forklift tipping skips in environments such as on new build construction sites, where telehandlers are present and health and safety is vitally important. We are so confident in the quality of all of our tipping skips and the benefits of our telehandler tipping skips that we offer free demonstrations and trials of our tipping skips to house builders. We are convinced that once you have used our tipping skips for a week you will be convinced that they are not only the most advanced tipping skip on the market, but also that the quality of the manufacturing and durability of the skip also makes them the best value for money tipping skips available in the Ireland
Auto Telehandler Tipping Skip advantages over conventional tipping skips are:
- Automatically lock/unlocks from behind the fork heels
- No safety retaining chain required
- Driver ALWAYS in the safety of the cab
- Controlled tipping from within the cab
- No hydraulic hoses to attach
- Less wear & tear to both the Tipping Skip and Telehandler
- Easy maintenance
Our Auto Telehandler Tipping Skip are manufactured in the United Kingdom using a 3mm mild steel plate body with a reinforced angle top and a one way entry base frame in 5mm steel plate. The Auto Telehandler Tipping Skips are also fitted with auto locking to forks, assisted by a gas strut. Note - these gas struts are protected by a bolt on steel guard.
All of our Auto Telehandler Tipping Skips are C.E. Marked and come complete with full operating instructions.
We also have a range of Forklift Self-Tipping Skip & Heavy Duty Tipping Skip available to buy direct from the Hermeq website.